Hunter 700L Stock – Remington® 700 Long Action
Upgraded features for your Remington LA
- FREE SHIPPING on orders over $75
- MADE & ENGINEERED IN THE USA
- 100% SATISFACTION guaranteed
- PRODUCT DETAILS
- TECH SPECS
Upgraded features for your Remington LA
Made from reinforced polymer and an anodized aluminum bedding block, the Hunter 700L Stock – Remington 700 Long Action offers users a cost effective upgrade featuring fully adjustable length of pull, comb height, and enhanced ergonomics.
Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true “drop-in” solution*. The 700L is also M-LOK® compatible to accept a broad range of accessories.
Also compatible with our Magpul Bolt Action Magazine Well 700L, which allows the rifle to be used with detachable AICS-spec box magazines without the need for custom inletting.
Made in the USA.
STRONG BEDDING BLOCK
Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block
DIMPLED DRILL POINTS AND OTHER SLING OPTIONS
Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8" long dome stud)
Push-button QD swivel compatibility in rear with optional Sling Mount Kits
Left and Right rear 1-1/4" Footman's Loops
Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads
60 degree grip angle from bore axis
Tapered Beam design provides good rigidity through forend and will free-float compatible barrels
SPACER SYSTEM FOR CUSTOM LENGTH OF PULL
Adjustable LOP from 13.0"-15.0" with included 0.50" spacers
M-LOK SLOTS FOR ADDITIONAL ACCESSORIES
M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options
OPTIONAL CHEEK RISERS FOR COMB HEIGHT ADJUSTMENT
Optional 0.00", 0.50", and 0.75" Cheek Risers available to adjust cheek weld (stock comes pre-fitted with 0.25" Riser)
AICS-SPEC PMAG 5 AC™ L, Standard - AICS Long
Easily upgradeable to removable AICS-spec long action magazines (.30-06 or .300WM pattern) with the affordable Magpul Bolt Action Magazine Well 700L
Export Administration Regulations Controlled Product
EXPORT NOTICE: This is an item controlled for export by the Export Administration Regulations (EAR) under the Commerce Control List (CCL). These controls take the form of export regulations and license requirements. As part of the express consideration provided for receipt of Magpul's goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by Magpul in violation of U.S. law is prohibited. Customers acquiring controlled goods, technical data and/or services from Magpul shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws. (See Magpul Compliance Notices page for more information).
WARNING: Observe safe firearm handling practices at all times. Failure to do so may result in serious bodily injury or death. Magpul Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product.
|Butt-Pad Dimensions||1.5 x 5.0 in.|
|Compatibility||Standard Remington 700 pattern long action rifles (receiver mounting screw center-to-center of 7.375") with stock Remington hinged floorplates*|
|LOP Adjustment Range||~13.0-15.0 in.|
|Weight||3.2 lbs. without action and bottom metal (with two Spacers installed)|
|Width of Butt, max||1.5 in.|
|Width of Forend, max||2.3 in.|
*NOTE: Fits right-hand receivers only.
Accepts ALL factory Remington barrels.
Compatible with aftermarket barrel profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech).
Accepts most factory and aftermarket triggers.
All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well 700L Standard or Magnum. Not compatible with Remington 700 DM models with their proprietary detachable box magazines.
Due to interference with raised Cheek Risers, not compatible with the ISS system (J-Lock bolt) without modification. Regardless of bolt used, all raised Cheek Risers will need to be temporarily detached to remove the bolt for maintenance.
Since factory action mounting screws can come in a variety of lengths, grinding to length or utilizing longer replacements may be necessary to optimize fit with the Hunter 700L.