Control your X4 device from your preferred tactical position
MADE & ENGINEERED IN THE USA
FREE SHIPPING
on orders over $75 
100% SATISFACTION
guaranteed 
The Maztech X4 Rail-Mounted Remote controls an X4 device from any preferred tactical position. The X4 Rail-Mounted Remote plugs in to the Input/Output (I/O) Accessory Port on either the X4-FCS™ or the X4-LRF™. The rugged ODU® breakaway I/O connector ensures a robust connection during firing. The buttons have tactile feedback when clicked, and each button supports single-click, double-click and long-click functions.
When connected to the X4-FCS, use the 3-button keypad on the X4 Rail-Mounted Remote to perform the same functions as the control knob and push-button on the X4-FCS. The triangle and circle buttons on the remote simulate turning the X4-FCS knob forward and backward, while the square button on the remote simulates the X4-FCS button-press.
When connected to the X4-LRF, use the 3-button keypad on the X4 Rail-Mounted Remote to perform the same functions as the 3 buttons on the X4-LRF. The triangle button maps to the (L)ase button, the square button maps to the (M)enu button, and the circle button maps to the (R)ange button.
When your X4-FCS is connected to your X4-LRF via the X4 FCS-to-LRF Cable, you can still plug in your X4 Rail-Mounted Remote into the I/O Accessory Port on your X4-FCS. In this case, your X4 Rail-Mounted Remote will control the X4-LRF (L)ase and (R)ange functions.
The X4 Rail-Mounted Remote is designed for a Picatinny rail. Easily tighten to your weapon rail with a rail bolt that supports a T15 Torx tool (included) or a flathead screwdriver. The 8ʺ cable length is designed to be long enough to place the remote on typical Picatinny rail locations, but short enough to minimize snag hazards.
No batteries are required. The X4 Rail-Mounted Remote is fabricated from durable polymers that function from -40° F to 140° F and withstand water immersion down to a depth of three (3) feet for 30 minutes.
Made in the USA.
MULTIPLE FUNCTIONS
Connected to the X4-FCS, the 3-button keypad performs the same functions as the control knob and FCS push-button
Connected to the X4-LRF, the 3-button keypad performs the same functions as the three buttons found on the LRF
When X4-FCS and X4-LRF are used together, the remote plugs into the I/O Accessory Port on your X4-FCS where it controls the X4-LRF lase and range functions
SIMPLE USER INTERFACE
Mounts on MIL-STD-1913 Picatinny rails for customizable placement
8” cable is long enough to allow placement almost anywhere on a rail while being short enough to minimize snagging
No batteries necessary
For Maztech specific Returns and Warranty information please see our Shipping & Returns page.
CALIFORNIA WARNING: Can expose you to formaldehyde, a carcinogen, and bisphenol S (BPS), a reproductive toxicant. See www.P65Warnings.ca.gov.
E.A.R.
Export Administration Regulations Controlled Product
EXPORT NOTICE: This is an item controlled for export by the Export Administration Regulations (EAR) under the Commerce Control List (CCL). These controls take the form of export regulations and license requirements. As part of the express consideration provided for receipt of Magpul's goods, technical data and/or services, you, our customer, acknowledge that the export, re-export or other transfer, directly or indirectly, of the goods, technical data and/or services provided by Magpul in violation of U.S. law is prohibited. Customers acquiring controlled goods, technical data and/or services from Magpul shall be responsible for obtaining any necessary U.S. or other government authorization required to ensure compliance with applicable export laws. (See Magpul Compliance Notices page for more information).
WARNING: Observe safe firearm handling practices at all times. Failure to do so may result in serious bodily injury or death. Magpul Industries shall not be responsible for injury, death, or property damage resulting from faulty installation, misuse, illegal use, or modification of this product.
| Overall dimensions | 13.9 x 1.3 x 0.8 in. (352 x 33 x 10 mm) |
|---|---|
| Weight | 1.5 oz. (41 g) |
| Compatibility | Mounts to STANAG 4694 rails (STANAG 2324 / Picatinny MIL-STD-1913.) Compatible with the X4-FCS (Fire Control System) and X4-LRF (Laser Rangefinder); sold separately |
| Other Specs |
|
